+
  • 射频综合测试仪.png
  • HRA4080接口图.png

HRA4080


Frequency range: 5kHz~8GHz; Noise level: better than< -162dBm@1GHz ; Maximum real-time bandwidth: 40MHz; Single sideband phase noise:<-98dBc/Hz @ 10kHz; Up to 80dB medium mirror frequency suppression; Standard measurement functions include universal spectrum analysis, vector network analysis, antenna feeder measurement, field strength measurement, and advanced spectrum measurement; Optional real-time spectrum, GPS/BD navigation, USB power probe, interference positioning and other functional modules; 10.1-inch high brightness display screen and support for touch operation; Detachable lithium-ion batteries;

Product Classification:

Key words:


HRA4080 RF comprehensive tester is a multifunctional comprehensive tester that integrates spectrum analysis, vector network analysis, antenna feeder testing, vector voltmeter, field strength measurement, interference localization, USB power measurement, and other functions; Adopting a 10.1-inch LED backlight high brightness display screen, supporting multi touch operation; The product has comprehensive testing functions and is very suitable for various parameter testing needs. It can be battery powered, small in size, light in weight, and easy to carry. It is a powerful tool for on-site testing parameters, engineering installation and debugging, and daily maintenance and repair of various electronic devices. It can be widely used in communication, broadcasting and television, radio management, electronic detection and countermeasures, precision guidance and other fields.

Universal spectrum analysis function

The general spectrum analysis complete parameters such as the frequency and power of the signal through the two measurement methods of scanning and FFT.

Vector network analysis function

Including functions such as resident Bobby test, dial -up loss test, impedance round diagram, fault positioning and other functions.

Advanced measurement function

With the measurement functions such as strong measurement, frequency counting, channel measurement, third-order interoperability, harmonic distortion, noise ratio, chromatography, audio demodulation, and PASS-FAIL.

Express the average noise level

Ensure the ability to measure faint signals.

Have a variety of measurement interfaces

There are interfaces such as mid -frequency output, external reference input, external trigger input, USB, LAN, headset and other interfaces.

Support touch screen can quickly complete operations

10.1 -inch high bright touch screen and support touch operation.

  • Frequency range: 5kHz~8GHz;
  • Noise level: better than< -162dBm@1GHz ;
  • Maximum real-time bandwidth: 40MHz;
  • Single sideband phase noise:<-98dBc/Hz @ 10kHz;
  • Up to 80dB medium mirror frequency suppression;
  • Standard measurement functions include universal spectrum analysis, vector network analysis, antenna feeder measurement, field strength measurement, and advanced spectrum measurement;
  • Optional real-time spectrum, GPS/BD navigation, USB power probe, interference positioning and other functional modules;
  • 10.1-inch high brightness display screen and support for touch operation;
  • Detachable lithium-ion batteries;
Model Name Frequency range Maximum real-time bandwidth Resolution Bandwidth Phase noise Display average noise level Trace Source Price
HRA4080 5kHz~8GHz 40MHz 1Hz~5MHz -98dBc/Hz@10kHz -162dBm Optional Quote
Configuration Describe Order number
RF comprehensive tester host 5kHz to 8GHz (sweep frequency spectrum, vector network, antenna feeder, vector voltmeter, field strength measurement, and advanced measurement kit) HRA4080
Standard CD-ROM(user manual, programming manual)  
AC/DC adapter (AC input,+20VDC output)  
2 N/SMA-JK adapters and 2 SMA-JJ cables  
Optional High stability time base HRA-OCX0
real-time spectrum analysis HRA-RTSA
GPS/BD navigation (with GPS antenna) HRA-BD
Interference localization HRA-IL
USB power sensor (10MHz~6GHz) UP60
Analog modulation analysis (AM/FM modulation analysis) HRA-AMA
Broadband omnidirectional antenna (300MHz~7.5GHz) OA750
Mechanical School(DC~9000MHz) CK009
Broadband directional antenna (600MHz~8GHz) DA800
Ultra short wave handheld direction finding antenna (9kHz~8000MHz) SDA800
Vector Net Calibration Kit (4 SMA type negative calibration pieces, DC~9GHz) CK009

Previous Page

Next Page

Previous Page

Next Page

Universal attachments (optional)

Vector Net Calibration Kit

Sagittal Net Calibration Kit (4 SAM type negative calibration pieces, DC-9GHz)

Ultra short wave handheld direction finding antenna (9kHz~8000MHz)

9KHz-30MHz handheld directional antenna 20MHz~200MHz handheld directional antenna 200MHz~500MHz handheld directional antenna 500MHz~8000MHz handheld directional antenna

LNA010 broadband amplifier

When not using a direct power cord, it is necessary to ensure that the input voltage of the broadband amplifier is+5V. When using a direct power cord, it is necessary to ensure that the input voltage of the direct power cord is+5V

PLA030 Pulse limiter

The main function of a limiter is to limit the output signal amplitude to a certain range, which means that when the input amplitude exceeds a certain reference value, the output amplitude will be limited to a certain amplitude and will no longer change with the input voltage. The applicable frequency range is 50kHz~1GHz.

RFS003 Radio frequency switch

The applicable frequency range of the RF switch (RFS003) is 9kHz~300MHz. When the RF switch is turned off, the isolation degree is 34dB (minimum value). This RF switch is mainly used in conjunction with our company's limiter.

ANT01 Near-field probe

ANT01 is a cost-effective near-field probe primarily used to locate interference sources and determine the cause of interference. It can be used to detect the direction and strength of the magnetic field on the surface of the device;

PRBI-400 Current injection probe

The current injection probe is mainly used for conducting sensitivity measurement; The interference signal is injected into the signal cable or power line of EUT to simulate external interference to determine the conduction sensitivity of EUT.

CDN016-M3 Coupling decoupling network

The coupling/decoupling  network consists of two parts: coupling and decoupling.The main  function of decoupling is to prevent useful signals from leaking to the power supply terminal (AE port) and to prevent disturbing signals from interfering with useful signals. The function of coupling is to transmit the disturbance signal of the device under test (EUT port) to the signal port.(RF port) in order to measure by measuring instruments, or transmit the electromagnetic disturbance signal of RF transmitter to the tested equipment. 

VB30 vswr bridge

• Frequencyrange: 10MHz-3.6GHz  • Tested port: N (female) type  • IN-1o-DUTinsertion loss: 4dB (typical)  • Directionality: 24dB (typical)  • Maximum input power: +30dBm(lW)  • Applicable models: HSA800 series, SAi 000 series and SA2000 series 

T/R1000 RF Demo Kit

• Radio frequency amplifier: The frequency range is 10MHz~2GHz,And the gain is 9dB~15d8(14dB@lGHz) • Radio frequency band-pass filter: Bandwidth 920MHz沉5MHz,Center frequency 922.5MHz  • Mixer: RF IN 5MHz~1500MHz             LO IN 5MHz~500MHz             RF OUT DC-1000MHz  • Oscillator LO/N:Frequency range 35MHz~4400MHz, Output power -3dBm--10dBm  •Oscillator LO:The frequency range is 2200MHz~4400MHz.,And the output power is 0dBm~+ 13dBm • Variable gain amplifier:Frequency range 15MHz~30MHz, gainrange 0dB~30dB  • Intermediate band pass filter: Bandwidth19.9MHz~22.9MHz ,Center frequency 21.4MHz • Reference timebase: 10MHz  •Interfuce:USB

FD100 frequency detection characteristic test module

• Based on BALUELEC Spectrum Analyzer, It can provide frequency discrimination   characteristic test function, Which can replace frequency scrumer  • Size 100mmx60mmx25mm • Universal USB interfuce for easy control  • Weight≤200g • Applicable models: SA1000 series and SA2000 series

DA800 directional broadband antenna

• Frequency measurement range: 600MHz-8000MHz •Input impedance: 50Ω • VSWR(Typical):<2:1 • Gain (Typical): 6dBi • Weight: 400g • Dimension: 353mrnx223mrnx28mrn

Message feedback

Welcome to leave a message online, please fill in the information according to the following form; We will contact you as soon as possible according to the information you fill in

Submit Message

Contact Us

Tel: +86-0551-68107097

Email: admin@baluelec.com

Address: No. 800, Wangjiang West Road, High-tech Zone, Hefei City, Anhui Province China.

WeChat
WeChat
Tiktok
Tiktok
Video Number
Video Number

Copyright © Baluelec

安安新材料

 Powered by: 300.cn  |  SEO   |   Business License