+
  • HRM260产品.jpg

HRM260


频率范围:9kHz~8/26.5GHz(接收模式),20MHz~8GHz(测向模式); 可调数字中频带宽,最大40MHz全景中频显示; 数据链信号识别(LINK-11、LINK-4A、LINK-16); 数字信号解调分析(2ASK、2FSK、 BPSK、QPSK、16QAM); 高速全景扫描,记录回放; 移动通信时间门测量; 干扰源的测向和定位; 近场空间可疑信号侦测;

Key words:

Manual Download:


  手持式电磁信号监测测向系统是一款专业化、智能化的多功能电磁信号检测仪器,能够对目标场所内非法无线电信号进行快速搜索、分选、识别和分析,并基于电子地图进行测向和交叉定位。系统由探测模块、宽带全向/定向天线、跟踪定位和信号处理模块等组成。具有大带宽、高灵敏度、扫描快速、出色的续航能力等特点,适用于部队、政府、机关和公共安全等领域的安全检查和侦察测向。

近场信号侦察

具有近场空间可疑信号侦测功能。

地图测向定位

基于电子地图进行测向和交叉定位。

数据链信号识别

数据链信号识别(LINK-11、LINK-4A、LINK-16)。

数字信号解调

数字信号解调分析(2ASK、2FSK、BPSK、QPSK、16QAM)。

  • 频率范围:9kHz~26.5GHz
  • 输入阻抗:50Ω
  • 全景扫描速率:80GHz/s@100kHz、
  • VSWR:≤ 2.0:1(10MHz~8GHz)、≤ 2.5:1(8GHz~18GHz)、≤ 3.0:1(18GHz~26.5GHz)(典型值,射频10dB衰减)
  • 幅度精度:±2.5dB
  • 噪声系数(低噪声模式):18dB(典型值)
  • 三阶截点(TOI):13dB(典型值)
  • 二阶截点(SOI):40dB(典型值)
  • 相位噪声:-90dBc/Hz@10kHz
  • 固有剩余响应:-95dBm(大于-95dBm不超过5个点)

型号名称

频率范围

幅度精度 相位噪声 全景扫描速度 固有剩余响应 输入阻抗

价格

HRM080A 9kHz~8GHz ≤±1.5dB -100dBc/Hz@10kHz 80GHz/s@100kHz -110dBm 50Ω 联系报价
HRM260 9kHz~26.5GHz ≤±1.5dB -90dBc/Hz@10kHz 80GHz/s@100kHz -95dBm 50Ω 联系报价
配置 描述 订货号
主机 侦测系统主机(9kHz~8GHz) HRM080A
侦测系统主机(9kHz~26.5GHz) HRM260
标配 宽带全向天线(1MHz~8GHz) OA080
GPS天线(GPS北斗双模)
电源线(220VAC)
电源适配器(20V6A) GST120A20-P1M
N/SMA-JK接头
双SMA电缆(80cm)
耳机 GM180
选配 信号识别选件 HRM-SCF
信号解调选件 HRM-SMD
测向天线 定向天线-1(9kHz~30MHz) SDA800
定向天线-2(20MHz~200MHz)
定向天线-3(200MHz~500MHz)
定向天线-4(500MHz~8000MHz)
视频解调选件 HRM-VD
WIFI检查 HRM-WIFI
测向定位选件 HRM-TL

Previous Page

Next Page

Previous Page

Next Page

Download information

Universal attachments (optional)

Vector Net Calibration Kit

Sagittal Net Calibration Kit (4 SAM type negative calibration pieces, DC-9GHz)

Ultra short wave handheld direction finding antenna (9kHz~8000MHz)

9KHz-30MHz handheld directional antenna 20MHz~200MHz handheld directional antenna 200MHz~500MHz handheld directional antenna 500MHz~8000MHz handheld directional antenna

LNA010 broadband amplifier

When not using a direct power cord, it is necessary to ensure that the input voltage of the broadband amplifier is+5V. When using a direct power cord, it is necessary to ensure that the input voltage of the direct power cord is+5V

PLA030 Pulse limiter

The main function of a limiter is to limit the output signal amplitude to a certain range, which means that when the input amplitude exceeds a certain reference value, the output amplitude will be limited to a certain amplitude and will no longer change with the input voltage. The applicable frequency range is 50kHz~1GHz.

RFS003 Radio frequency switch

The applicable frequency range of the RF switch (RFS003) is 9kHz~300MHz. When the RF switch is turned off, the isolation degree is 34dB (minimum value). This RF switch is mainly used in conjunction with our company's limiter.

ANT01 Near-field probe

ANT01 is a cost-effective near-field probe primarily used to locate interference sources and determine the cause of interference. It can be used to detect the direction and strength of the magnetic field on the surface of the device;

PRBI-400 Current injection probe

The current injection probe is mainly used for conducting sensitivity measurement; The interference signal is injected into the signal cable or power line of EUT to simulate external interference to determine the conduction sensitivity of EUT.

CDN016-M3 Coupling decoupling network

The coupling/decoupling  network consists of two parts: coupling and decoupling.The main  function of decoupling is to prevent useful signals from leaking to the power supply terminal (AE port) and to prevent disturbing signals from interfering with useful signals. The function of coupling is to transmit the disturbance signal of the device under test (EUT port) to the signal port.(RF port) in order to measure by measuring instruments, or transmit the electromagnetic disturbance signal of RF transmitter to the tested equipment. 

VB30 vswr bridge

• Frequencyrange: 10MHz-3.6GHz  • Tested port: N (female) type  • IN-1o-DUTinsertion loss: 4dB (typical)  • Directionality: 24dB (typical)  • Maximum input power: +30dBm(lW)  • Applicable models: HSA800 series, SAi 000 series and SA2000 series 

T/R1000 RF Demo Kit

• Radio frequency amplifier: The frequency range is 10MHz~2GHz,And the gain is 9dB~15d8(14dB@lGHz) • Radio frequency band-pass filter: Bandwidth 920MHz沉5MHz,Center frequency 922.5MHz  • Mixer: RF IN 5MHz~1500MHz             LO IN 5MHz~500MHz             RF OUT DC-1000MHz  • Oscillator LO/N:Frequency range 35MHz~4400MHz, Output power -3dBm--10dBm  •Oscillator LO:The frequency range is 2200MHz~4400MHz.,And the output power is 0dBm~+ 13dBm • Variable gain amplifier:Frequency range 15MHz~30MHz, gainrange 0dB~30dB  • Intermediate band pass filter: Bandwidth19.9MHz~22.9MHz ,Center frequency 21.4MHz • Reference timebase: 10MHz  •Interfuce:USB

FD100 frequency detection characteristic test module

• Based on BALUELEC Spectrum Analyzer, It can provide frequency discrimination   characteristic test function, Which can replace frequency scrumer  • Size 100mmx60mmx25mm • Universal USB interfuce for easy control  • Weight≤200g • Applicable models: SA1000 series and SA2000 series

DA800 directional broadband antenna

• Frequency measurement range: 600MHz-8000MHz •Input impedance: 50Ω • VSWR(Typical):<2:1 • Gain (Typical): 6dBi • Weight: 400g • Dimension: 353mrnx223mrnx28mrn

Message feedback

Welcome to leave a message online, please fill in the information according to the following form; We will contact you as soon as possible according to the information you fill in

Submit Message

Contact Us

Tel: +86-0551-68107097

Email: admin@baluelec.com

Address: No. 800, Wangjiang West Road, High-tech Zone, Hefei City, Anhui Province China.

WeChat
WeChat
Tiktok
Tiktok
Video Number
Video Number

Copyright © Baluelec

安安新材料

 Powered by: 300.cn  |  SEO   |   Business License