• MSG200A.png
  • 4(1709724001506).png
  • 2(1709724001264).png
  • 1(1709724001214).png


The frequency range is 100kHz ~ 15GHz/9KHz ~ 20GHz; The high signal is pure, and the typical value of the phase noise ≤ 115dBc/Hz@10kHz (1GHz); Output power -120dBm to+10dBm; Support various simulation modulation AM/FM/ΦM, support external waveform modulation; Support pulse modulation, up to 70dB of interrupt ratio; Provide internal modulation sources: sine waves, waves, triangular waves; Standard the LAN interface, provide a standard SCPI command set; The characteristics of low power consumption, light weight and small volume are suitable for system integration and installation.

Key words:

MSG150A/ MSG200A microwave signal source module has ultra -wide frequency bands, excellent performance and convenient integration characteristics. The module has a variety of practical functions such as continuous wave signals, simulation modulation, pulse modulation, amplitude/ frequency scanning, and low frequency function waveform output. Very high cost performance. The module height is standard 1U, which is suitable for system integration and desktop test measurement equipment. The complete standard SCPI command set and universal LAN interface brings great convenience for you to remote control and secondary development.

Broadband, high performance

It has ultra -broadband bands, excellent performance, small volume, high reliability, flexible functional configuration, and can be applied to a variety of measurement occasions.

Support multiple modulation methods

Support a variety of simulation modulation, pulse modulation, etc.

Comes with a variety of internal modulation sources and support external modulation source input.


Support frequency scanning, amplitude scanning, frequency + scanning.

Low -frequency output

Provide internal modulation sources: sine waves, waves, triangular waves.

  • Frequency range: 9kHz ~ 20GHz
  • Frequency resolution: 0.01Hz
  • Reference frequency: 10MHz
  • Temperature stability: ± 1ppm
  • Internal reference output: 10MHz, ≥+8dBm
  • Harmonics typical value: ≤ -30dBc
  • Non-harmonics typical value: ≤ -60dBc
  • SSB phase noise: -115dBc/Hz@10kHz
  • Output power range: maximum output power:+10dBm, minimum output power: -120dBm
  • Power accuracy: ± 1.0dB (typical value)
Model Name Frequency range Frequency resolution Phase noise

Output power

(indicator guarantee)

Modulation Type Communication Interface Price
MSG150A 100kHz~15GHz 0.01Hz -115dBc/Hz@10kHz -120dBm to +10dBm AM/FM/ΦM/Pulse Standard LAN communication interface Quote
MSG200A 9kHz~20GHz 0.01Hz -115dBc/Hz@10kHz -120dBm to +10dBm AM/FM/ΦM/Pulse Standard LAN communication interface Quote
Configuration Describe Order number
Host Microwave signal source module MSG150A、MSG200A
Appendix CD(user manual, programming manual)  
Power adapter (standard+12V power adapter)  

Previous Page

Next Page

Previous Page

Next Page

Universal attachments (optional)

Vector Net Calibration Kit

Sagittal Net Calibration Kit (4 SAM type negative calibration pieces, DC-9GHz)

Ultra short wave handheld direction finding antenna (9kHz~8000MHz)

9KHz-30MHz handheld directional antenna 20MHz~200MHz handheld directional antenna 200MHz~500MHz handheld directional antenna 500MHz~8000MHz handheld directional antenna

LNA010 broadband amplifier

When not using a direct power cord, it is necessary to ensure that the input voltage of the broadband amplifier is+5V. When using a direct power cord, it is necessary to ensure that the input voltage of the direct power cord is+5V

PLA030 Pulse limiter

The main function of a limiter is to limit the output signal amplitude to a certain range, which means that when the input amplitude exceeds a certain reference value, the output amplitude will be limited to a certain amplitude and will no longer change with the input voltage. The applicable frequency range is 50kHz~1GHz.

RFS003 Radio frequency switch

The applicable frequency range of the RF switch (RFS003) is 9kHz~300MHz. When the RF switch is turned off, the isolation degree is 34dB (minimum value). This RF switch is mainly used in conjunction with our company's limiter.

ANT01 Near-field probe

ANT01 is a cost-effective near-field probe primarily used to locate interference sources and determine the cause of interference. It can be used to detect the direction and strength of the magnetic field on the surface of the device;

PRBI-400 Current injection probe

The current injection probe is mainly used for conducting sensitivity measurement; The interference signal is injected into the signal cable or power line of EUT to simulate external interference to determine the conduction sensitivity of EUT.

CDN016-M3 Coupling decoupling network

The coupling/decoupling  network consists of two parts: coupling and decoupling.The main  function of decoupling is to prevent useful signals from leaking to the power supply terminal (AE port) and to prevent disturbing signals from interfering with useful signals. The function of coupling is to transmit the disturbance signal of the device under test (EUT port) to the signal port.(RF port) in order to measure by measuring instruments, or transmit the electromagnetic disturbance signal of RF transmitter to the tested equipment. 

VB30 vswr bridge

• Frequencyrange: 10MHz-3.6GHz  • Tested port: N (female) type  • IN-1o-DUTinsertion loss: 4dB (typical)  • Directionality: 24dB (typical)  • Maximum input power: +30dBm(lW)  • Applicable models: HSA800 series, SAi 000 series and SA2000 series 

T/R1000 RF Demo Kit

• Radio frequency amplifier: The frequency range is 10MHz~2GHz,And the gain is 9dB~15d8(14dB@lGHz) • Radio frequency band-pass filter: Bandwidth 920MHz沉5MHz,Center frequency 922.5MHz  • Mixer: RF IN 5MHz~1500MHz             LO IN 5MHz~500MHz             RF OUT DC-1000MHz  • Oscillator LO/N:Frequency range 35MHz~4400MHz, Output power -3dBm--10dBm  •Oscillator LO:The frequency range is 2200MHz~4400MHz.,And the output power is 0dBm~+ 13dBm • Variable gain amplifier:Frequency range 15MHz~30MHz, gainrange 0dB~30dB  • Intermediate band pass filter: Bandwidth19.9MHz~22.9MHz ,Center frequency 21.4MHz • Reference timebase: 10MHz  •Interfuce:USB

FD100 frequency detection characteristic test module

• Based on BALUELEC Spectrum Analyzer, It can provide frequency discrimination   characteristic test function, Which can replace frequency scrumer  • Size 100mmx60mmx25mm • Universal USB interfuce for easy control  • Weight≤200g • Applicable models: SA1000 series and SA2000 series

DA800 directional broadband antenna

• Frequency measurement range: 600MHz-8000MHz •Input impedance: 50Ω • VSWR(Typical):<2:1 • Gain (Typical): 6dBi • Weight: 400g • Dimension: 353mrnx223mrnx28mrn

Message feedback

Welcome to leave a message online, please fill in the information according to the following form; We will contact you as soon as possible according to the information you fill in

Submit Message

Contact Us

Tel: +86-0551-68107097

Email: admin@baluelec.com

Address: No. 800, Wangjiang West Road, High-tech Zone, Hefei City, Anhui Province China.

Video Number
Video Number

Copyright © Baluelec


 Powered by: 300.cn  |  SEO   |   Business License