+
  • MRM100.jpg
  • 1(1709724130486).png
  • 2(1709724130538).png

MRM100


Monitoring frequency 9kHz ~ 3.6GHz; The adjustable bandwidth in the adjustable number, the maximum 5MHz panoramic mid -frequency display; Signal storage is placed, which is convenient for the monitoring, processing and positioning of the transient signal; I/Q data stream records to a maximum bandwidth of 500kHz; Support AM/FM broadcast signal demodulation, and provide analog audio stream interface; Good API documents are provided for users to program system programming or application expansion; LAN interface, for remote control and data output; The characteristics of low power consumption, light weight and small volume are suitable for system integration and installation;

Key words:


  The MRM100 modular monitoring receiver has excellent performance and small volume. The monitoring frequency covers 9kHz ~ 3.6GHz. The monitoring range can not only cover HF, VHF and UHF bands, but also can perform high -speed scanning users. In the integrated application scenario, the module can transmit I/Q data and spectrum data to the network server to facilitate signal analysis and processing. Especially in the application of distributed RF sensors, multiple receiver modules can remotely deploy connections on the standard TCP/IP network.

Panorama mid -frequency

The adjustable bandwidth in the adjustable number, the maximum 5MHz panoramic mid -frequency display.

Frequency scanning

The frequency scanning mode is the main user's fixed channel interval of radio service monitoring.

Users can flexibly set the scanning frequency range and frequency step pace, and set different scan variables for different signals.

 

 

 

 

Broadcast signal demodulation

Support AM/FM broadcast signal demodulation and provide analog audio stream interface.

Transfer IQ data

You can transmit IQ data and spectrum data to the network server for signal analysis and processing.

  • Frequency range: 9kHz ~ 3.6GHz
  • Input impedance: 50Ω
  • Vswr: ≤ 2: 1
  • Energy accuracy: ± 1.5dB
  • Pre -selection device: Qualcomm / Low -pass filter combination
  • Noise coefficient: typical value 15dB
  • Third -order cutting point (T O i): Typical value 13dBm
  • Second -order cutting point (s o i): typical value 40dBm
  • Phase noise: typical value -83dBc/Hz
  • Mirror frequency suppression: ≥ 6 0 d B
  • Mid -frequency inhibitory: ≥ 6 0 d B
  • Inherent remaining response: Typical value -1 0 0 d B m
Model Name Frequency range Amplitude accuracy Phase noise Mirror frequency suppression Intrinsic residual response Input impedance Price
MRM100 9kHz~3.6GHz ≤±1.5dB -83dBc/Hz@10kHz 60dB -100dBm 50Ω Quote
MRM080 9kHz~8GHz ≤±1.5dB -98dBc/Hz@10kHz 80dB -110dBm 50Ω Quote
MRM180 9kHz~18GHz ≤±1.5dB -90dBc/Hz@10kHz 60dB -100dBm 50Ω Quote
Configuration Designation Model
Host Monitor the receiving machine module MRM100
Standard CD CD (user manual, programming manual, upper machine software (basic software package))  
LAN connection cable (standard Ethernet)  
Optional Compact omnidirectional antenna (0.3 ~ 7.5GHz) 0A750
Handheld orientation antenna (0.6 ~ 8GHz) DA800

Previous Page

Next Page

Previous Page

Next Page

Universal attachments (optional)

Vector Net Calibration Kit

Sagittal Net Calibration Kit (4 SAM type negative calibration pieces, DC-9GHz)

Ultra short wave handheld direction finding antenna (9kHz~8000MHz)

9KHz-30MHz handheld directional antenna 20MHz~200MHz handheld directional antenna 200MHz~500MHz handheld directional antenna 500MHz~8000MHz handheld directional antenna

LNA010 broadband amplifier

When not using a direct power cord, it is necessary to ensure that the input voltage of the broadband amplifier is+5V. When using a direct power cord, it is necessary to ensure that the input voltage of the direct power cord is+5V

PLA030 Pulse limiter

The main function of a limiter is to limit the output signal amplitude to a certain range, which means that when the input amplitude exceeds a certain reference value, the output amplitude will be limited to a certain amplitude and will no longer change with the input voltage. The applicable frequency range is 50kHz~1GHz.

RFS003 Radio frequency switch

The applicable frequency range of the RF switch (RFS003) is 9kHz~300MHz. When the RF switch is turned off, the isolation degree is 34dB (minimum value). This RF switch is mainly used in conjunction with our company's limiter.

ANT01 Near-field probe

ANT01 is a cost-effective near-field probe primarily used to locate interference sources and determine the cause of interference. It can be used to detect the direction and strength of the magnetic field on the surface of the device;

PRBI-400 Current injection probe

The current injection probe is mainly used for conducting sensitivity measurement; The interference signal is injected into the signal cable or power line of EUT to simulate external interference to determine the conduction sensitivity of EUT.

CDN016-M3 Coupling decoupling network

The coupling/decoupling  network consists of two parts: coupling and decoupling.The main  function of decoupling is to prevent useful signals from leaking to the power supply terminal (AE port) and to prevent disturbing signals from interfering with useful signals. The function of coupling is to transmit the disturbance signal of the device under test (EUT port) to the signal port.(RF port) in order to measure by measuring instruments, or transmit the electromagnetic disturbance signal of RF transmitter to the tested equipment. 

VB30 vswr bridge

• Frequencyrange: 10MHz-3.6GHz  • Tested port: N (female) type  • IN-1o-DUTinsertion loss: 4dB (typical)  • Directionality: 24dB (typical)  • Maximum input power: +30dBm(lW)  • Applicable models: HSA800 series, SAi 000 series and SA2000 series 

T/R1000 RF Demo Kit

• Radio frequency amplifier: The frequency range is 10MHz~2GHz,And the gain is 9dB~15d8(14dB@lGHz) • Radio frequency band-pass filter: Bandwidth 920MHz沉5MHz,Center frequency 922.5MHz  • Mixer: RF IN 5MHz~1500MHz             LO IN 5MHz~500MHz             RF OUT DC-1000MHz  • Oscillator LO/N:Frequency range 35MHz~4400MHz, Output power -3dBm--10dBm  •Oscillator LO:The frequency range is 2200MHz~4400MHz.,And the output power is 0dBm~+ 13dBm • Variable gain amplifier:Frequency range 15MHz~30MHz, gainrange 0dB~30dB  • Intermediate band pass filter: Bandwidth19.9MHz~22.9MHz ,Center frequency 21.4MHz • Reference timebase: 10MHz  •Interfuce:USB

FD100 frequency detection characteristic test module

• Based on BALUELEC Spectrum Analyzer, It can provide frequency discrimination   characteristic test function, Which can replace frequency scrumer  • Size 100mmx60mmx25mm • Universal USB interfuce for easy control  • Weight≤200g • Applicable models: SA1000 series and SA2000 series

DA800 directional broadband antenna

• Frequency measurement range: 600MHz-8000MHz •Input impedance: 50Ω • VSWR(Typical):<2:1 • Gain (Typical): 6dBi • Weight: 400g • Dimension: 353mrnx223mrnx28mrn

Message feedback

Welcome to leave a message online, please fill in the information according to the following form; We will contact you as soon as possible according to the information you fill in

Submit Message

Contact Us

Tel: +86-0551-68107097

Email: admin@baluelec.com

Address: No. 800, Wangjiang West Road, High-tech Zone, Hefei City, Anhui Province China.

WeChat
WeChat
Tiktok
Tiktok
Video Number
Video Number

Copyright © Baluelec

安安新材料

 Powered by: 300.cn  |  SEO   |   Business License