• SRM180.png


The frequency range is 9kHz ~ 8GHz/18GHz; The adjustable bandwidth in the adjustable number, the maximum 40MHz panoramic intermediate frequency display; The panoramic scanning speed is as high as 80GHz/s, which is easy to set and discover quickly; With panoramic scanning, frequency band scanning, list scan and fixed frequency point monitoring functions; With AM/FM/LSB/USB/CW audio demodulation mode, it provides digital/simulation audio stream interfaces; Support multi -target audio demodulation and field strength measurement, and provide analog audio stream interface; Have AM/FM modulation analysis capabilities to meet the standard ITU measurement requirements; Signal storage is placed, which is convenient for the monitoring, processing and positioning of the transient signal; I/Q data stream record, the storage bandwidth is up to 40MHz, and the real -time storage depth is as high as 4GB; Support GPS/BD time synchronization function, data timestamp accuracy is better than 40ns; Comprehensive SDK development packages and API documents, users can flexibly develop secondary development according to demand; LAN interface, for remote control and data output; Small size, easy to install and disassemble, meet the IP65 protection level;

Product Classification:

Key words:

The SRM080/180 radio frequency sensor provides economic high -efficiency mobile radio monitoring and positioning solutions. The monitoring frequency covers 9kHz ~ 8GHz/18GHz, real -time bandwidth to 40MHz, and frequency scanning speed is as high as 80GHz/s. And positioning module. Single modules can be used for radio monitoring and monitoring, and multi -module combinations can be monitored for networking. Not only can the abnormal signals monitor the abnormal signals, but also use the TDOA positioning method to accurately position the abnormal points. The module is small in size, easy to install and disassemble, meets the IP65 protection level, and can effectively deploy the full -function radio frequency monitoring station to the place required.

Comes with PC upper machine

The receiver comes with the PC upper machine independently, or you can use a comprehensive SDK development package for secondary development.

Panorama mid -frequency

The adjustable bandwidth in the adjustable number, the maximum 40MHz panoramic mid -frequency display, can allow users to observe the changes in the transient spectrum in the medium bandwidth in real time.

Frequency scanning

The frequency scanning mode is the main user's fixed channel interval of radio service monitoring. Users can flexibly set the scanning frequency range and frequency step pace, and set different scan variables for different signals.

Discrete scanning

Special settings can be made for each discrete frequency band, including starting, termination frequency, step/resolution, and threshold, which provides convenience for users who often monitor certain fixed discrete frequency bands.



Multiple demodulation mode

The demodulation mode includes: AM, FM, WFM, and CW.

  • Frequency range: 9kHz ~ 18GHz
  • Input impedance: 50Ω
  • Vswr: ≤ 2.5: 1
  • Energy accuracy: ± 1.5db
  • Noise coefficient: 18DB
  • Third -order cutting point (Toi): 10dbm
  • Second -order cutting point (SOI): 40dbm
  • Phase noise: -98dbc/Hz@10kHz
  • Mirror frequency suppression: 60db
  • Mid -frequency inhibitory: 70db
  • Inherent remaining response: -95dbm
Model Name Frequency range Amplitude accuracy Phase noise Mirror frequency suppression Intrinsic residual response Input impedance Price
SRM080 9kHz~8GHz ≤±1.5dB -100dBc/Hz@10kHz 80dB -110dBm 50Ω Quote
SRM180 9kHz~18GHz ≤±1.5dB -95dBc/Hz@10kHz 60dB -100dBm 50Ω Quote
Configuration Describe 订货号
Host RF sensor SRM080
Appendix CD CD (user manual, programming manual, upper machine software (basic software package))  
LAN connection line (standard Ethernet network)  
Optional GPS/BD timing module (including antenna) SRM-GPS
Compact omnidirectional antenna (0.3 ~ 7.5GHz) 0A750
Handheld orientation antenna (0.6 ~ 8GHz) DA800

Previous Page

Next Page

Previous Page

Next Page

Universal attachments (optional)

Vector Net Calibration Kit

Sagittal Net Calibration Kit (4 SAM type negative calibration pieces, DC-9GHz)

Ultra short wave handheld direction finding antenna (9kHz~8000MHz)

9KHz-30MHz handheld directional antenna 20MHz~200MHz handheld directional antenna 200MHz~500MHz handheld directional antenna 500MHz~8000MHz handheld directional antenna

LNA010 broadband amplifier

When not using a direct power cord, it is necessary to ensure that the input voltage of the broadband amplifier is+5V. When using a direct power cord, it is necessary to ensure that the input voltage of the direct power cord is+5V

PLA030 Pulse limiter

The main function of a limiter is to limit the output signal amplitude to a certain range, which means that when the input amplitude exceeds a certain reference value, the output amplitude will be limited to a certain amplitude and will no longer change with the input voltage. The applicable frequency range is 50kHz~1GHz.

RFS003 Radio frequency switch

The applicable frequency range of the RF switch (RFS003) is 9kHz~300MHz. When the RF switch is turned off, the isolation degree is 34dB (minimum value). This RF switch is mainly used in conjunction with our company's limiter.

ANT01 Near-field probe

ANT01 is a cost-effective near-field probe primarily used to locate interference sources and determine the cause of interference. It can be used to detect the direction and strength of the magnetic field on the surface of the device;

PRBI-400 Current injection probe

The current injection probe is mainly used for conducting sensitivity measurement; The interference signal is injected into the signal cable or power line of EUT to simulate external interference to determine the conduction sensitivity of EUT.

CDN016-M3 Coupling decoupling network

The coupling/decoupling  network consists of two parts: coupling and decoupling.The main  function of decoupling is to prevent useful signals from leaking to the power supply terminal (AE port) and to prevent disturbing signals from interfering with useful signals. The function of coupling is to transmit the disturbance signal of the device under test (EUT port) to the signal port.(RF port) in order to measure by measuring instruments, or transmit the electromagnetic disturbance signal of RF transmitter to the tested equipment. 

VB30 vswr bridge

• Frequencyrange: 10MHz-3.6GHz  • Tested port: N (female) type  • IN-1o-DUTinsertion loss: 4dB (typical)  • Directionality: 24dB (typical)  • Maximum input power: +30dBm(lW)  • Applicable models: HSA800 series, SAi 000 series and SA2000 series 

T/R1000 RF Demo Kit

• Radio frequency amplifier: The frequency range is 10MHz~2GHz,And the gain is 9dB~15d8(14dB@lGHz) • Radio frequency band-pass filter: Bandwidth 920MHz沉5MHz,Center frequency 922.5MHz  • Mixer: RF IN 5MHz~1500MHz             LO IN 5MHz~500MHz             RF OUT DC-1000MHz  • Oscillator LO/N:Frequency range 35MHz~4400MHz, Output power -3dBm--10dBm  •Oscillator LO:The frequency range is 2200MHz~4400MHz.,And the output power is 0dBm~+ 13dBm • Variable gain amplifier:Frequency range 15MHz~30MHz, gainrange 0dB~30dB  • Intermediate band pass filter: Bandwidth19.9MHz~22.9MHz ,Center frequency 21.4MHz • Reference timebase: 10MHz  •Interfuce:USB

FD100 frequency detection characteristic test module

• Based on BALUELEC Spectrum Analyzer, It can provide frequency discrimination   characteristic test function, Which can replace frequency scrumer  • Size 100mmx60mmx25mm • Universal USB interfuce for easy control  • Weight≤200g • Applicable models: SA1000 series and SA2000 series

DA800 directional broadband antenna

• Frequency measurement range: 600MHz-8000MHz •Input impedance: 50Ω • VSWR(Typical):<2:1 • Gain (Typical): 6dBi • Weight: 400g • Dimension: 353mrnx223mrnx28mrn

Message feedback

Welcome to leave a message online, please fill in the information according to the following form; We will contact you as soon as possible according to the information you fill in

Submit Message

Contact Us

Tel: +86-0551-68107097

Email: admin@baluelec.com

Address: No. 800, Wangjiang West Road, High-tech Zone, Hefei City, Anhui Province China.

Video Number
Video Number

Copyright © Baluelec


 Powered by: 300.cn  |  SEO   |   Business License