• MSA200(1698053059619).png
  • 4(1709725443120).png
  • 2(1709725443077).png
  • 3(1709725443004).png


Frequency range: 9kHz ~ 26.5GHz; Noise level: better than -160dBm; Resolution bandwidth: 1Hz ~ 5MHz; Maximum real -time bandwidth: 40MHz; MSA080 mid -mirror frequency suppression ratio is as high as 80dB; Use the USB and LAN interfaces to facilitate the control connection; Standard SCPI instructions make the system integration test flexible and convenient; Small size, power supply power supply, easy to systematic integration;

Key words:

The MSA series spectrometer is a broadband, high -performance, small -sized microwave spectrum analyzer, which covers the frequency of 5kHz ~ 20GHz. Highly integrated radio frequency front -end and digital processing integrated design, so that it has super small volume and independent signal processing capabilities, which is suitable for application of microwave test system integration. MSA series modular spectrometer's main technical indicators are comparable to the Taiwan -style spectrometer. The 80DB mid -mirror frequency suppression and the very small remaining response indicators make it meet the requirements of radio monitoring. The maximum 40MHz real -time bandwidth meets the test of common radio signals such as mobile communication, television and WIFI, and the 145MHz simulation medium frequency output provides users with multiple tests. Standard SCPI instructions can easily realize the replacement of system testing equipment.

Universal spectrum analysis function

The general spectrum analysis complete parameters such as the frequency and power of the signal through the two measurement methods of scanning and FFT.

Advanced measurement function

It has a variety of measurement functions such as frequency counting, three -order interoperability, and harmonic distortion.

Express the average noise level

Ensure the ability to measure faint signals.

Easy to develop secondary development

Small volume, power supply power supply, easy to systematically integrate.

  • Frequency range: 9kHz ~ 26.5GHz
  • Maximum real -time bandwidth: 40MHz
  • Resolution bandwidth: 1Hz ~ 5MHz
  • Phase noise: -95dBc/Hz@10kHz
  • Show the average noise level: -158dBm
  • Scanning time non -zero scan width: 5ms to 3000s
  • Scanning time Zero -scan: 20us to 3000s
  • Scan mode: continuous, single, a single time
  • Trigger source: freedom, video, external
  • Power current: about 1.2A
Model Name Frequency range Maximum real-time bandwidth Resolution Bandwidth Phase noise Display average noise level Trace Source Price
MSA080 5kHz~8GHz 40MHz 1Hz~5MHz -98dBc/Hz@10kHz -165dBm Optional Quote
MSA200 9kHz~20GHz 40MHz 1Hz~5MHz -95dBc/Hz@10kHz -160dBm Optional Quote
MSA260 9kHz~26.5GHz 40MHz 1Hz~5MHz -95dBc/Hz@10kHz -160dBm Optional Quote
MSA820A 9kHz~1.8GHz / 1Hz~3MHz -90dBc/Hz@30kHz -158dBm Optional Quote
MSA830 9kHz~3.6GHz / 1Hz~3MHz -90dBc/Hz@30kHz -160dBm Optional Quote
MSA870 9kHz~7.5GHz / 1Hz~3MHz -80dBc/Hz@30kHz -158dBm Optional Quote
Configuration Designation Model
Spectrum analyzer module 9kHz to 20GHz MSA200
9kHz to 26.5GHz MSA260
Standard CD CD (user manual, programming manual, PC upper machine software)  
+12V power adapter or two -core power connection cable, LAN connection cable  

Previous Page

Next Page

Previous Page

Next Page

Universal attachments (optional)

Vector Net Calibration Kit

Sagittal Net Calibration Kit (4 SAM type negative calibration pieces, DC-9GHz)

Ultra short wave handheld direction finding antenna (9kHz~8000MHz)

9KHz-30MHz handheld directional antenna 20MHz~200MHz handheld directional antenna 200MHz~500MHz handheld directional antenna 500MHz~8000MHz handheld directional antenna

LNA010 broadband amplifier

When not using a direct power cord, it is necessary to ensure that the input voltage of the broadband amplifier is+5V. When using a direct power cord, it is necessary to ensure that the input voltage of the direct power cord is+5V

PLA030 Pulse limiter

The main function of a limiter is to limit the output signal amplitude to a certain range, which means that when the input amplitude exceeds a certain reference value, the output amplitude will be limited to a certain amplitude and will no longer change with the input voltage. The applicable frequency range is 50kHz~1GHz.

RFS003 Radio frequency switch

The applicable frequency range of the RF switch (RFS003) is 9kHz~300MHz. When the RF switch is turned off, the isolation degree is 34dB (minimum value). This RF switch is mainly used in conjunction with our company's limiter.

ANT01 Near-field probe

ANT01 is a cost-effective near-field probe primarily used to locate interference sources and determine the cause of interference. It can be used to detect the direction and strength of the magnetic field on the surface of the device;

PRBI-400 Current injection probe

The current injection probe is mainly used for conducting sensitivity measurement; The interference signal is injected into the signal cable or power line of EUT to simulate external interference to determine the conduction sensitivity of EUT.

CDN016-M3 Coupling decoupling network

The coupling/decoupling  network consists of two parts: coupling and decoupling.The main  function of decoupling is to prevent useful signals from leaking to the power supply terminal (AE port) and to prevent disturbing signals from interfering with useful signals. The function of coupling is to transmit the disturbance signal of the device under test (EUT port) to the signal port.(RF port) in order to measure by measuring instruments, or transmit the electromagnetic disturbance signal of RF transmitter to the tested equipment. 

VB30 vswr bridge

• Frequencyrange: 10MHz-3.6GHz  • Tested port: N (female) type  • IN-1o-DUTinsertion loss: 4dB (typical)  • Directionality: 24dB (typical)  • Maximum input power: +30dBm(lW)  • Applicable models: HSA800 series, SAi 000 series and SA2000 series 

T/R1000 RF Demo Kit

• Radio frequency amplifier: The frequency range is 10MHz~2GHz,And the gain is 9dB~15d8(14dB@lGHz) • Radio frequency band-pass filter: Bandwidth 920MHz沉5MHz,Center frequency 922.5MHz  • Mixer: RF IN 5MHz~1500MHz             LO IN 5MHz~500MHz             RF OUT DC-1000MHz  • Oscillator LO/N:Frequency range 35MHz~4400MHz, Output power -3dBm--10dBm  •Oscillator LO:The frequency range is 2200MHz~4400MHz.,And the output power is 0dBm~+ 13dBm • Variable gain amplifier:Frequency range 15MHz~30MHz, gainrange 0dB~30dB  • Intermediate band pass filter: Bandwidth19.9MHz~22.9MHz ,Center frequency 21.4MHz • Reference timebase: 10MHz  •Interfuce:USB

FD100 frequency detection characteristic test module

• Based on BALUELEC Spectrum Analyzer, It can provide frequency discrimination   characteristic test function, Which can replace frequency scrumer  • Size 100mmx60mmx25mm • Universal USB interfuce for easy control  • Weight≤200g • Applicable models: SA1000 series and SA2000 series

DA800 directional broadband antenna

• Frequency measurement range: 600MHz-8000MHz •Input impedance: 50Ω • VSWR(Typical):<2:1 • Gain (Typical): 6dBi • Weight: 400g • Dimension: 353mrnx223mrnx28mrn

Message feedback

Welcome to leave a message online, please fill in the information according to the following form; We will contact you as soon as possible according to the information you fill in

Submit Message

Contact Us

Tel: +86-0551-68107097

Email: admin@baluelec.com

Address: No. 800, Wangjiang West Road, High-tech Zone, Hefei City, Anhui Province China.

Video Number
Video Number

Copyright © Baluelec


 Powered by: 300.cn  |  SEO   |   Business License