FAQ

FAQ


Picture Name
A Check if the USB device is connected to other instruments or computers and can function properly. b. Confirm that the device used is a Flash type USB device, and this instrument does not support hard disk type USB devices. c. After restarting the instrument, insert the USB device for inspection. If it still cannot be used normally, please contact after-sales service.

Picture Name
a. Check if the signal connection cable is securely connected to the corresponding RF port. b. Check the connecting wire for internal damage. c. Check if the connecting wire is securely connected to the testing instrument. d. Check if both the "MOD ON" and "RF ON" button backlights are on, and check if the modulation status switch is turned on. e. Check if the modulation parameter settings are appropriate and adjust the modulation parameters appropriately. f. If using an external modulation source, please ensure that the external source is connected correctly and has an output, and work within the specified range of the signal source.

Picture Name
The frequency range of the MSG150A microwave signal source module is 100kHz~15GHz, with ultra wide frequency band, excellent performance, and easy integration characteristics. The module has various practical functions such as continuous wave signal, analog modulation, pulse modulation, amplitude/frequency scanning, and low-frequency function waveform output, and has a very high cost-effectiveness. The module height is standard 1U, suitable for system integration and desktop testing and measurement equipment use. The complete standard SCPI command set and universal LAN interface bring great convenience for remote control and secondary development.

Picture Name
1. Set the parameters on the spectrometer that require data collection. 2. After the waveform stabilizes, click the quick screenshot button on the software interface to save the waveform, or insert a USB flash drive to export the screenshot to the USB flash drive for saving.

Picture Name
1) Check the power supply Before starting the machine, it is necessary to confirm that the AC power cord is reliably grounded before inserting the power cord plug into a standard three core socket. Do not use unprotected power cords. Floating or poor grounding can cause damage to the spectrum analyzer and even cause personal injury.

Picture Name
The method of using the signal generator includes setting parameters, selecting waveforms, adjusting the frequency, adjustment amplitude, adjustment phase, etc. The following is a specific explanation.
< 12 >

Contact Us

Tel: +86-0551-68107097

Email: admin@baluelec.com

Address: No. 800, Wangjiang West Road, High-tech Zone, Hefei City, Anhui Province China.

WeChat
WeChat
Tiktok
Tiktok
Video Number
Video Number

Copyright © Baluelec

安安新材料

 Powered by: 300.cn  |  SEO   |   Business License